Fire Alarm Control Trainer Show Case Type
Product Overview
This Fire Alarm Control Trainer is the scale down automatic fire detection alarm system installed in buildings. It is design to educate student the functional aspect of this fire protection system.
This module unit can be activated to simulate the activation of the whole fire protection system real time.
This control panel works on 24VDC and is operated by 240VAC 50Hz power supply. In the event of power failure, back-up supply is available from stand-by battery pack. Unit will automatically switch to battery power when AC supply is interrupted therefore integrity of the system is maintained at all time. It will automatically revert to AC power when normal power supply is restored. At the same time back-up battery pack will automatically be re-charged to the regular level.
The show case panels come in various ranges from 4 zones as standard. Larger zones capacities are available to user's specification. Build-in mimic diagram with LED indicator are located on the panel to show the location of the alarmed zone. It accepts a wide variety of detectors and sounding devices with line supervised output provided for zone and alarm bell circuits. Optional fire pump sets and auxiliary panel status can be monitored remotely.
Experiments Cover :
- Demonstrate the process of fire alarm control panel activation
- Provides real time simulation and activation of the fire alarm control system
- Able to determine the actual course of activation from the control panel and safety procedure to be taken
Applications
Fire Alarm Control Trainer has been specially designed for courses of building services, mechanical & electrical engineering, plant engineering, chemical engineering, marine & mining engineering etc.
Technical Specifications
Modules Included :
- 1 Unit 4 Zones Fire Alarm Control Panel C/W Built In Charger
- 2 Units Standby Battery 12V/2.3Ah Sealed Lead Acid Gel
- 1 Unit Smoke Detector
- 1 Unit Heat Detector
- 1 Unit Manual Alarm Button (Breakglass)
- 1 Unit Alarm Bell
- 2 Units Flash Light (Red & Yellow)
Fire Alarm Control Panel :
Specification :
- Main & D/C On Indication
- Main Fail Indication
- Battery Fail Indication
- Charger Fail Indication
- Bell Line Fail Indication
- Zone Fire, Fault & Isolate Indication
- Evacuate Switch & Indication
- Buzzer Isolate Switch & Indication
- Bell Isolate Switch & Indication
- Fire Station Isolate & Indication
- Auxiliary Trip Isolate Switch & Indication
- Test Zone Alarm, Fault & Isolate Switch
- Master Reset Push Button Switch
Technical Data :
- Power supply input : 240VAC, 50Hz
- Charger : Auto / Trickle
- End of line : 8K2 Ohms
- CMS output : N/O Contact
- Operating / System : 24V DC
- Charging rate : 300mA / 2.5A (Boost)
- Auxiliary output : 24V, 1A
Current spec :
- Standby Mode - Master: 75mA, per zone c/w detector: 5mA
Alarm Mode :
- Master - 140mA, per trigger zone: 70mA
- Output devices (typical) : 200mA, per bell: 30mA
Student Courseware :
- Instruction Manual consists of circuit/wiring diagram, devices information, experiments and operation of the system in softcopy CD Format
Features & Benefits
- Simple layout with easy to operate features
- Simple operation
- Self contained - required only electrical supply (240VAC, 50Hz)
- User friendly and easy to operate
- Used standard devices and components which are readily available
- Built-in standby batteries in case of power supply failure
- Easy to maintain - can be repaired and service by any competent fire technician
Fire Alarm Control Trainer Show Case Type Related Products
Other specialized products for engineering, technical educational and scientific laboratories such as Fire Alarm Control Trainer Show Case Type.
Buy Fire Alarm Control Trainer Show Case Type from India's Trusted Manufacturer
Stemlab Export is a leading manufacturer and exporter of laboratory and scientific equipment in India, supplying institutions and bulk tenders worldwide — with direct factory pricing, recognised standards and global exports.
Direct from Factory
No middlemen — manufacturer pricing, full quality control and quick quotations on every product.
Standards Compliant
Built to recognised standards such as ASTM, IS and BIS where applicable, accepted by institutions and tenders.
Bulk & Tender Quantities
Supplied in bulk volumes to procurement bodies, education ministries and global tenders.
Worldwide Shipping
Exports to 30+ countries with complete documentation and logistics handled in-house.
Who Uses Our Fire Alarm Control Trainer Show Case Type?
Our Fire Alarm Control Trainer Show Case Type is engineered for teaching laboratories, research facilities, government projects and international export contracts. Every unit ships with quality documentation, standards compliance and dependable after-sales support.
Institutions choose Stemlab Export for transparent pricing, on-time delivery and decades of manufacturing experience across hundreds of scientific, educational and engineering products — from school science labs to advanced research benches.
Bulk Order of Fire Alarm Control Trainer Show Case Type?
Send us your requirement list or tender BOQ and we'll respond with a fully compliant manufacturer quote. Trusted by institutional and government buyers worldwide.