Automatic Control Operations II Application
Product Overview
The Automatic Control Operations II Application, in order to instruct the students about the most important operations of alternating current motors.
Technical Specifications
ATENG 11047 � Automatic Control Operations II Application
- The �ATENG 11047� application includes the following elements:
- N-ALI01. Industrial Main Power Supply Module.
- Supply voltage: 400 VAC, 3PH + N.
ON / OFF removable key.
- Output voltage connections:
- Three-phase + Neutral: 400 VAC.
- Single-phase: 230 VAC.
- Three-phase supply hose with IP44 3PN + E 32 A 400 V connecting plug.
N-ALI01
- Differential magnetothermal 4 poles, 25 A, 30 mA AC 6 KA.
Emergency stop push-button.
- N-ALI03. AC Auxiliary Power Supply (24 Vac) Module.
- Voltage supply (single-phase): 230 VAC, 1PH + N.
- Output voltage:
- Single�phase 24 VAC / 12 VAC.
- 24 VDC.
- 0 � 24 VDC through potentiometer.
N-ALI03
- N-PUL02. Emergency Stop Push-Button Module.
Emergency push-button to connect or disconnect the control circuit.
- Nominal voltage: 24 VAC.
- Contacts:
One normally open contact (NO).
One normally close contact (NC).
N-PUL02
- N-PUL48. Three Double Chamber Push-Buttons Module.
Two independent chambers.
- Nominal voltage: 24 VAC.
Three double chamber push-buttons (green and red).
- Contacts:
Three normally open contacts (NO) for green switch.
Three normally close contacts (NC) for red switch.
N-PUL48
- N-LAM02. Auxiliary Lamps Module.
- Nominal voltage: 24 VAC.
Three lamps (red, yellow and green).
- N-CON01. Three-Pole Contactor Module (24 VAC) (4 units).
- Nominal voltage for power contacts: 400 VAC.
- Nominal voltage for control contacts: 24 VAC.
N-LAM02
- Nominal voltage for the control coil: 24 VAC.
- Contacts:
Three-phase normally open contact (NO) for power circuit.
Three normally open contacts (NO) for control circuit.
Two normally close contacts (NC) for control circuit.
- N-REL47. Thermal Relay Module.
- Nominal voltage for power contacts: 400 VAC.
N-CON01
- Nominal voltage for the control coil: 24 VAC.
- Contacts:
Three-phase normally open vontact (NO) for power circuit.
- N-REL30. Synchronization Relay Module (2 units).
- Nominal voltage for power contacts: 400 VAC.
- Nominal voltage for control contacts: 24 VAC.
N-REL47
- Nominal voltage for the control coil: 24 VAC.
- Contacts:
One three-phase normally open contact (NO) for power circuit.
- Three auxiliary contacts:
One instantaneous normally open contact (NO).
One time normally open contact (NO).
One time normally close contact (NC).
N-REL30
3
Specifications
- N-TRANS03. Three-Phase Autotransformer 400/230 VAC, 1 kVA, Module.
Three-phase autotransformer.
- Nominal supply voltage: 400 VAC (3PH).
- Nominal output voltage: 3 x 230 VAC (3PH + N).
- Nominal power: 1 kVA.
- Transformer connection: YY0.
Start/stop commutator for instantaneous connection/disconnection of the grid transformer. N-TRANS03
- Fuses: 3 x 5 A.
- . 3PH Squirrel-Cage Motor.
- Nominal power: 370 W.
- Nominal voltage: 3 x 230 / 400 VAC ?/Y.
- Frequency: 50 / 60 Hz.
- Number of poles: 2.
- Speed: 2730 rpm.
- Nominal current: 1.67 / 0.97 A.
- Shaft height: 71 mm.
- FLYW. Flywheel.
- Weight: 2 kg.
- Recommended maximum speed: 4000 rpm.
- Moment of inertia: 0.0025 kgm�.
- All necessary cables to realize the practical exercises are included.
FLYW
Cables and accessories, for normal operation.
Automatic Control Operations II Application Related Products
Other specialized products for engineering, technical educational and scientific laboratories such as Automatic Control Operations II Application.
Buy Automatic Control Operations II Application from India's Trusted Manufacturer
Stemlab Export is a leading manufacturer and exporter of laboratory and scientific equipment in India, supplying institutions and bulk tenders worldwide — with direct factory pricing, recognised standards and global exports.
Direct from Factory
No middlemen — manufacturer pricing, full quality control and quick quotations on every product.
Standards Compliant
Built to recognised standards such as ASTM, IS and BIS where applicable, accepted by institutions and tenders.
Bulk & Tender Quantities
Supplied in bulk volumes to procurement bodies, education ministries and global tenders.
Worldwide Shipping
Exports to 30+ countries with complete documentation and logistics handled in-house.
Who Uses Our Automatic Control Operations II Application?
Our Automatic Control Operations II Application is engineered for teaching laboratories, research facilities, government projects and international export contracts. Every unit ships with quality documentation, standards compliance and dependable after-sales support.
Institutions choose Stemlab Export for transparent pricing, on-time delivery and decades of manufacturing experience across hundreds of scientific, educational and engineering products — from school science labs to advanced research benches.
Bulk Order of Automatic Control Operations II Application?
Send us your requirement list or tender BOQ and we'll respond with a fully compliant manufacturer quote. Trusted by institutional and government buyers worldwide.