Advanced AC Electrical Motors Application
Product Overview
The Advanced AC Electrical Motors Application, to carry out electrical/mechanical test for a great variety of AC motors.
Technical Specifications
ATENG 11126 — Advanced AC Electrical Motors Application
- The “ATENG 11126” application includes the following elements:
- N-ALI01. Industrial Main Power Supply Module.
- Supply voltage: 400 VAC, 3PH + N.
ON / OFF removable key.
- Output voltage connections:
- Three-Phase + Neutral: 400 VAC.
- Single-Phase: 230 VAC.
- Three-Phase supply hose with IP44 3PN + E 32 A 400 V connecting plug.
N-ALI01
- Differential magnetothermal 4 poles, 25 A, 300 mA AC 6 KA.
Emergency stop push-button.
- N-REL09. Time Electronic Relay against Overcurrents Module (0-16 A).
Overcurrent electronic relay.
Overload protection.
- Range: 0 – 16 A.
Test and reset function.
NO / NC contact.
Timing. N-REL09
- N-REL60. Single-Phase Over / Undercurrent Relay Module.
Overcurrent electronic relay.
- Range: 0.05 – 10 A.
Reset and test function.
NO / NC contact.
Timing.
N-REL60
- N-ARR12. Direct Starter Module.
- Nominal voltage: 400 VAC.
- Maximum contacts current: 10 A.
- Two positions commutator (ON / OFF):
- 0: Open circuit.
- 1: Closed circuit.
- N-EALD. Electrical Network Analyzer Module with Oscilloscope and Data Acquisition. N-ARR12
The network analyzer module allows fulfilling measurements, displaying and analyzing all
the parameters of the AC electrical networks. It has an LCD screen and push-buttons for the
navigation through the different menus. It includes specific software for monitoring current and
voltage curves, harmonics display, tariffs programming, alarms programming and electrical
parameters storage.
- Features:
- Multifunctional three-phase power meter:
- Three-phase and single-phase voltage. Up to 690 VAC L-L. N-EALD
- Line and neutral nominal current: 10 A.
Active, reactive and apparent power.
- Suitable frequencies: 25 Hz, 50 Hz, 60 Hz and 400 Hz.
Display of the V-I vector diagram.
- Supply voltage: 85 – 265 VAC.
- Energy quality control:
Current and voltage individual harmonics measurement. Up to the 40th harmonic.
Voltage and current THD, TDD and K-Factor.
Maximums and minimums display.
Waveforms display, 128 samples/sec.
- Events and data storage:
- Harmonics analyzer:
Voltage and current THD, current TDD and K-Factor, up to the 40th harmonic.
Current and voltage harmonic spectrum and angles.
- Tariff programming:
Class 0.5S IEC 62053 – 22, active and reactive power in four quadrants.
Measurement of the total and per phase three-phase active, reactive and apparent
powers.
Usage time, four energy/demand records of total tariffs.
Eight tariffs, four seasons and four types of days.
Automatic daily report of energy consumption maximums and minimums.
- Communications:
RS – 485 communication port.
4
Specifications
- N-MED09. AC Ammeter Module (0-2.5 A).
- Measurement range: 0 – 2.5 A.
- Terminals:
Measurement terminals.
- N-MED11. AC Ammeter Module (0-10 A).
- Measuring range: 0 – 10 A. N-MED09
- Terminals:
Measurement terminals.
- MED65. Digital Multimeter.
- Digital multimeter with 3 ½ digits, with 4 mm double connector termination cables to facilitate
interconnections.
- With this digital multimeter we will be able to measure:
N-MED11
Voltage.
Current.
Resistance.
Capacitors capacity.
Temperature.
- TECNEL/TM. Hand Tachometer.
- 9 V battery. MED65
Three positions switch to choice the measurement method.
Speed recording push-button.
Speed measurement push-button.
Disassemble pieces for different shafts.
Speed digital display.
- N-SERV1K. 1 kW Servomotor Module. TECNEL/TM
Dynamic and static operating regime in four quadrants.
Speed and torque signals.
- Power supply terminals: 3 x 400 VAC.
- Frequency: 50 / 60 Hz.
- Nominal power: 1 kW.
- Maximum power: 3 kW.
- Maximum speed: 5000 rpm.
- Nominal torque: 3.18 Nm.
- Maximum torque: 9.55 Nm. N-SERV1K
Temperature control.
Speed control potentiometer.
Torque control potentiometer.
- Mode selection switch: torque/speed control.
Motor turning reversal switch.
- Required elements (at least one) (Not included):
- ACEMT-K1:Three-Phase Asynchronous Motor of Squirrel Cage Kit.
- . 3PH Squirrel-Cage Motor.
- Nominal power: 370 W.
- Nominal voltage: 3 x 230 / 400 VAC ? / Y.
- Frequency: 50 / 60 Hz.
- Number of poles: 2.
- Speed: 2730 rpm.
- Shaft height: 71 mm.
- N-TRANS03. Three-Phase Autotransformer 400/230 VAC, 1 kVA, Module.
Three-phase autotransformer.
- Input voltage: 400 VAC (3PH).
- Output voltage: 3 x 230 VAC (3PH + N).
- Nominal power: 1 kVA.
Three-phase ON / OFF switch.
- Fuses: 3 x 5 A. N-TRANS03
5
Specifications
- N-ARR01. Manual Star-Delta Starter Module.
- Nominal voltage: 400 VAC.
- Maximum contacts current: 10 A.
- Star-delta three positions commutator:
- 0: Open circuit.
- Y: Star connection.
- ?: Delta connection. N-ARR01
- ACEMT-K2: Three-Phase Asynchronous Motor of Wound Rotor Kit.
- EMT8. 3PH Wound Motor.
- Nominal power: 300 W.
- Nominal voltage: 3 x 230 / 400 VAC ? / Y.
- Frequency: 50 / 60 Hz.
- Number of poles: 2.
- Speed: 2870 rpm. EMT8
- Nominal current: 1 / 0.5 A.
- Shaft height: 71 mm.
- N-TRANS03. Three-Phase Autotransformer 400/230 VAC, 1 kVA, Module.
Three-phase autotransformer.
- Input voltage: 400 VAC (3PH).
- Output voltage: 3 x 230 VAC (3PH + N).
- Nominal power: 1 kVA.
Three-phase ON / OFF switch.
- Fuses: 3 x 5 A. N-TRANS03
- N-ARR01. Manual Star-Delta Starter Module.
- Nominal voltage: 400 VAC.
- Maximum contacts current: 10 A.
- Star-delta three positions commutator:
- 0: Open circuit.
- Y: Star connection.
N-ARR01
- ?: Delta connection.
- N-REFTI. Three-phase Independent Resistor Module.
- Nominal voltage: 400 VAC.
- Resistor value: 3 x 150 Ohm.
- Nominal power: 3 x 352 W.
Manual commutator to switch ON / OFF the resistors.
- Fuses: 3 x 5 A.
N-REFTI
- Terminals:
Three input terminals (3PH).
Three output terminals (3PH).
- ACEMT-K3: Three-Phase Dahlander Motor Kit.
- EMT9. Dahlander Motor, Two Speeds.
- Nominal power: 370 W.
- Nominal voltage: 3 x 400 VAC.
- Frequency: 50 / 60 Hz.
- Number of poles: 4 / 2.
- Speed: 1400 / 2800 rpm. EMT9
- Nominal current: 1.2 / 1.55 A.
- Shaft height: 71 mm.
- N-ARR07. Manual Dahlander Commutator Module, Two Speeds.
- Nominal voltage: 400 VAC.
- Maximum contacts current: 10 A.
- Three positions commutator:
- 0: Open circuit.
- 1: Low speed.
N-ARR07
- 2: High speed.
6
Specifications
- ACEMT-K4: Three-Phase Asynchronous Motor of Two Independent Speeds Kit.
- EMT10. 3PH Squirrel-Cage Motor, Two Speeds.
- Nominal power: 240 / 370 W.
- Nominal voltage: 3 x 400 VAC.
- Frequency: 50 / 60 Hz.
- Speed: 900 / 1420 rpm.
- Nominal current: 1.05 / 1.35 A. EMT10
- Shaft height: 71 mm.
- N-ARR09. Manual Independent Windings Commutator Module, Two Speeds.
- Nominal voltage: 400 VAC.
- Maximum contacts current: 10 A.
- Three positions commutator:
- 0: Open circuit.
- 1: Winding 1.
- 2: Winding 2. N-ARR09
- ACEMT-K5: Single-Phase Asynchronous Motor with Starting Capacitor Kit.
- EMT11. 1PH Squirrel-Cage Motor with Starting Capacitor.
- Nominal power: 370 W.
- Nominal voltage: 3 x 230 VAC.
- Frequency: 50 / 60 Hz.
- Speed: 2780 rpm.
- Nominal current: 2.53 A.
- Shaft height: 71 mm. EMT11
- ACEMT-K6: Single-Phase Asynchronous Motor with Starting and Running Capacitor Kit.
- EMT16. 1PH Squirrel-Cage Motor with Starting and Running Capacitor.
- Supply voltage: 110 – 220 VAC.
- Power: 370 W.
- Speed: 2780 rpm.
- Frequency: 50 / 60 Hz.
- Armature current: 1.85 A.
- Shaft height: 71 mm. EMT16
- ACEMT-K7: Single-Phase Asynchronous Motor with Split Phase Kit.
- EMT20. Asynchronous Single-phase Motor with Split Phase.
- Supply voltage: 220 VAC.
- Power: 370 W.
- Speed: 2780 rpm.
- Frequency: 50 Hz.
- Armature current: 2.53 A.
- Shaft height: 71 mm.
EMT20
- ACEMT-K8: Three-phase Reluctance Motor Kit.
- EMT21. 3PH Reluctance Motor.
- Nominal power: 300 W.
- Nominal voltage: 3 x 400 VAC.
- Frequency: 50 / 60 Hz.
- Speed: 3000 rpm.
- Nominal current: 1.4 A.
EMT21
- Shaft height: 71 mm.
- ACEMT-K9: Three-Phase Synchronous Generator Kit.
- EMT6. Independent Excitation 3PH Synchronous Motor-Generator.
- Nominal power: 250 W.
- Nominal output voltage: 3 x 400 VAC.
- Frequency: 50 / 60 Hz.
- Speed: 3000 rpm.
- Nominal output current: 1 A.
EMT6
- Nominal excitation current: 0.25 A.
- Shaft height: 71 mm.
7
Specifications
- N-VVCC/M. DC Motor Speed Controller Module (Intermediate option).
- Supply voltage: 230 VAC.
- Variable output voltage: 0 – 300 VDC.
- Fuse: 2 A.
N-VVCC/M
- N-REFTI. Three-phase Independent Resistor Module.
- Nominal voltage: 400 VAC.
- Resistor value: 3 x 150 Ohm.
- Nominal power: 3 x 352 W.
Manual commutator to switch ON / OFF the resistors.
- Fuses: 3 x 5 A.
N-REFTI
- Terminals:
Three input terminals (3PH).
Three output terminals (3PH).
Advanced AC Electrical Motors Application Related Products
Other specialized products for engineering, technical educational and scientific laboratories such as Advanced AC Electrical Motors Application.
Buy Advanced AC Electrical Motors Application from India's Trusted Manufacturer
Stemlab Export is a leading manufacturer and exporter of laboratory and scientific equipment in India, supplying institutions and bulk tenders worldwide — with direct factory pricing, recognised standards and global exports.
Direct from Factory
No middlemen — manufacturer pricing, full quality control and quick quotations on every product.
Standards Compliant
Built to recognised standards such as ASTM, IS and BIS where applicable, accepted by institutions and tenders.
Bulk & Tender Quantities
Supplied in bulk volumes to procurement bodies, education ministries and global tenders.
Worldwide Shipping
Exports to 30+ countries with complete documentation and logistics handled in-house.
Who Uses Our Advanced AC Electrical Motors Application?
Our Advanced AC Electrical Motors Application is engineered for teaching laboratories, research facilities, government projects and international export contracts. Every unit ships with quality documentation, standards compliance and dependable after-sales support.
Institutions choose Stemlab Export for transparent pricing, on-time delivery and decades of manufacturing experience across hundreds of scientific, educational and engineering products — from school science labs to advanced research benches.
Bulk Order of Advanced AC Electrical Motors Application?
Send us your requirement list or tender BOQ and we'll respond with a fully compliant manufacturer quote. Trusted by institutional and government buyers worldwide.