Automation Sensor Trainer

Product Overview

• Enables practical investigation of sensor and transducer topics
• Supports hands-on experimentation, circuit construction, and evaluation
• Each module includes labeled block diagrams, connection interfaces, and test points

Technical Specifications

Experiment Modules

1. Photo Infrared Sensor Module

• Input: 12 24V DC
• Output: NPN open collector
• Sensing range: 100 mm
• Target: Opaque and translucent materials
• Response time: 1 ms

2. Diffuse Reflective Photoelectric Sensor Module

• Input: 12 24V DC
• Output: NPN open collector
• Range: 100 mm
• Mode: Light ON / Dark ON selectable
• Target: Opaque and translucent materials
• Response time: 1 ms

3. Retro-Reflective Photoelectric Sensor Module

• Input: 12 24V DC
• Output: NPN open collector
• Range: up to 3 m
• Mode: Light ON / Dark ON selectable
• Target: Opaque material (minimum diameter 75 mm)
• Response time: 1 ms

4. Through-Beam Photoelectric Sensor Module

• Input: 12 24V DC
• Output: NPN open collector
• Range: up to 10 m
• Mode: Light ON / Dark ON selectable
• Target: Opaque material (minimum diameter 12 mm)
• Response time: 1 ms

5. Capacitive Proximity Sensor Module

• Detects metallic and non-metallic objects using electrostatic fields
• Input: 12 24V DC
• Range: 15 mm
• Output: NPN
• Frequency: 50 Hz

6. Inductive Proximity Sensor Module

• Detects metallic objects using electromagnetic field
• Input: 12 24V DC
• Range: 15 mm
• Output: NPN
• Frequency: 200 Hz

7. Ultrasonic Distance Sensor

• Range: 2 cm to 400 cm
• Voltage: 5V DC
• Current: 15 mA (typical)
• Frequency: 40 kHz
• Includes 1-meter ruler

8. Temperature and Humidity Controller Module

• Supply: 12V DC
• Temperature: -20 C to 60 C
• Humidity: 0% to 100% RH
• Accuracy: 0.1 C, 0.1% RH
• Output: Relay (up to 10A)

9. Thermocouple Temperature Sensor Module

• Sensors: Type K thermocouple and RTD
• Includes heater element with temperature control
• Supply: 24V DC
• Includes connectors for RTD and thermocouple

10. Pressure Sensor Module

• Range: 0 to 200 kPa
• Silicon strain gauge design
• Output span: ~60 mV
• Supports differential and gauge measurement

11. Pressure Gauge Module

• Mechanical pressure measurement device
• Range: 0 to 60 psi
• Includes calibration setup

12. LVDT Module

• Converts displacement into electrical signal
• Resistance: 1 k 10%
• Speed: up to 5 m/s
• Temperature: -40 C to 150 C
• Signal: 50 kHz sine wave, 20 Vpp
• Output: 10 mV/mm
• Travel: 20 mm

13. Load Cell and A/D Converter Module

• Load capacity: 10 kg
• Output: 2.0 mV/V
• Input resistance: 405
• Output resistance: 350
• Dual input channels
• Built-in regulator, oscillator, and reset
• Supply: 2.6V to 5.5V
• Temperature: 20 C to 85 C

14. Load Cell Display Module

• Input: 12V DC
• Impedance: 100 M
• Display: -1999 to 1999
• Output: 4 20 mA or 0 10V
• Relay output: 250V AC / 3A

15. Weight Set

Includes multiple weights:

• 200g (1), 100g (2), 50g (1), 20g (2), 10g (1)

16. Temperature Process Controller Module

• Input: 220 240V AC
• Accuracy: 5% FS
• Control: PID / ON-OFF
• Supports multiple thermocouples and RTDs
• Output: Relay and SSR

17. Heater Module

• Power: 50W
• Voltage: 240V AC
• Temperature: up to 220 C
• Heating method: Air flow radiation
• Level Control Module
• Operates with float sensor
• Normally closed type
• Operating voltage: 24V DC

19. Magnetic Float Sensor Module

• Reed switch type
• Used for level detection

20. Temperature Measurement Module

• Voltage: 24V DC
• Range: -50 C to 110 C
• Accuracy: 0.1 C

21. Power Supply Module

• Input: 240V AC / 50Hz
• Output: 24V DC

22. Digital Counter Module

• Supply: 24V DC
• Display: 4 digits
• Load: max 5A
• Reset via terminal contact

23. Modular Profile Panel

• 148 plug points
• Steel epoxy coated
• Dimensions: 600 700 100 mm

Laboratory System :

Power Supply

• Fixed: 5V, 12V (0.5A)
• Variable: 0 23V (positive and negative)

AC Supply

• Multi-tap output: 0V to 19V

Function Generator

• Waveforms: Sine, Triangle, Square
• Frequency: 1 Hz to 1 MHz
• Adjustable amplitude and offset

Additional Modules

• Data switches
• Interface adapters

Accessories :

• Test leads
• Tubing and syringe
• Power cord
• Manuals (printed and digital)

Experimental Table (Optional)

• Table size: 1500 800 800 mm
• Material: compressed board and steel frame
• Includes storage drawers and lockable wheels

Features & Benefits

• Educational training system for learning sensor and transducer fundamentals and operation
• Covers multiple sensors including temperature, pressure, proximity, photoelectric, load cell, float, and ultrasonic sensors
• Modular design allows customization based on course requirements
• Expandable with additional modules
• Durable plug-in panel with rubber-silicone compound for secure placement and easy handling
• Adjustable panel tilt settings